Synchronizing Power in Synchronous Machines Under Steady and Transient Conditions

The accuracy of all calculations relating to the hunting of synchronous machines connected mechanically to reciprocating apparatus depends largely upon the correctness with which the value of the synchronizing power P
8
may be determined. Thus, the calculation of flywheels necessary for the parallel operation of engine driven generators depends entirely on a correct value of P
8
. Likewise, the WT R
²
which it is necessary to incorporate in the rotors of synchronous motors when driving compressors or pumps can be calculated correctly only when P
8
is accurately known. So far as the author is aware, no attempt at a complete analysis of the subject has been made heretofore. The object of this paper is to develop a method by which the synchronizing power P
8
may be calculated fairly accurately under any condition likely to be met with. The method applies only to synchronous machines of the usual definite pole construction. Blondel's conception of two reactions with some modifications and extensions is followed generally throughout the paper.