Sampling effect of distributed reflector arrays within a single-phase unidirectional SAW transducer

A noteworthy feature of the group-type single-phase unidirectional transducer is that it can permit wideband low-loss surface-acoustic-wave (SAW) comb filter operation. This is shown to be due to the sampling imposed by the distributed reflector gratings. The capability is illustrated theoretically and experimentally for a 65-MHz comb filter on 128 degrees Y-X lithium niobate, with 5 comb modes of 585-kHz bandwidth each, together with 2.6-dB minimum insertion loss and overall 50% fractional bandwidth.<
>