InAs/AlSb double-barrier structure with large peak-to-valley current ratio: a candidate for high-frequency microwave devices

Negative differential resistance (NDR) in InAs/AlSb/InAs/AlSb/InAs double-barrier structures with peak-to-valley current (PVC) ratios as large as 11 at room temperature and 28 at 77 K is reported. This is a large improvement over previous results for these materials and is also considerably better than those obtained for the extensively studied GaAs/AlGaAs material system. The peak current density was also improved by reducing the barrier thickness, and values exceeding 10/sup 5/ A/cm/sup 2/ have been observed. These results suggest that InAs/AlSb structures are interesting alternatives to conventional GaAs/AlGaAs structures in high-frequency devices. NDR in a InAs/AlSb superlattice double-barrier structure with a lower PVC ratio than in the solid barrier case has also been observed. This result indicates that valley current contributions arising from X-point tunneling are negligible in these structures, consistent with the large band offset.<
>