DRAM plate electrode bias optimization for reducing leakage current in UV-O/sub 3/ and O/sub 2/ annealed CVD deposited Ta/sub 2/O/sub 5/ dielectric films

A new plate biasing scheme is described which allowed the use of 65% higher supply voltage without increasing the leakage current for the UV-O/sub 3/ and O/sub 2/ annealed chemical-vapor-deposited tantalum pentaoxide dielectric film capacitors in stacked DRAM cells. Dielectric leakage was reduced by biasing the capacitor plate electrode to a voltage lower than the conventionally used value of V/sub cc//2. Ta/sub 2/O/sub 5/ films with 3.9 nm effective gate oxide, 8.5 fF//spl mu/m/sup 2/ capacitance and <0.3 /spl mu/A/cm/sup 2/ leakage at 100/spl deg/C and 3.3 V supply are demonstrated.<
>