Fundamental insulation characteristics of high-pressure CO2 gas for gas-insulated power equipment - effect of coating conductor on insulation performance and effect of decomposition products on creeping insulation of spacer -

Currently, environmental problems such as global warming are important issues, and SF
₆
has been identified as a greenhouse gas with a long atmospheric lifetime. Therefore, in the long term, it is preferable to reduce the amount of SF
₆
used as an insulating gas. It is thus important to discuss the possibility of using more environmentally friendly gases as alternative insulation for gas-insulated apparatus. In this paper, we describe the fundamental insulation breakdown characteristics of high-pressure CO
₂
gas at gas pressures of up to 1.0 MPa under simulated practical conditions, including the insulation breakdown characteristics of a high-voltage conductor with an insulating coating and the effect of decomposition products on the creeping insulation of a spacer. With the aim of enhancing insulation performance, we discuss the effect of the type of insulating coating on insulation performance. The breakdown electric field was increased by 20% by coating the conductor. It was verified that the application of an insulating coating is a practical method for enhancing the insulation performance of high-pressure CO
₂
gas. It was also verified that the decomposition products have only a slight effect on the creeping insulation of the spacer except for when there is heavy pollution on the insulating spacer. However, if a large amount of decomposition products is expected to be deposited on the insulating spacer during operation, which may cause a severe interruption to the current, it will be necessary to consider this factor in the insulation design.