In-Flight Alignment and Calibration of Inertial Measurement Units - Part II: Experimental Results

This is the second part of a two-part paper which summarizes work pursued by the author in 1967 [2]. The paper describes the application of minimum-variance estimation techniques for in-flight alignment and calibration of an inertial measurement unit (IMU) relative to another IMU and/or some other reference. The first paper [1] formulates the problem, and this paper reports numerical results and analyses. The approach taken is to cast the problem into the framework of Kalman-Bucy estimation theory, where velocity and position differences between the two IMU's are used as observations and the IMU parameters of interest become part of the state vector. Instrument quantization and computer roundoff errors are considered as measurement noise, and environmental induced random accelerations are considered as state noise. In this paper, numerical results for three important IMU error parameter configurations are presented and discussed. The main results of the paper determine the effects of state and observation noise levels and the nominal trajectory on the identifications of the errors for these configurations. A discussion of the minimum number of trajectory maneuvers and of the optimal trajectory maneuvering is given.