A new fabrication technology for AlGaAs/GaAs HEMT LSIs using InGaAs nonalloyed ohmic contacts

The authors studied the nonalloyed ohmic characteristics of HEMTs (high electron mobility transistors). At high integration levels, nonalloyed ohmic contacts were found to have two advantages: an extremely short ohmic length with low parasitic source series resistance and direct connection between the source/drain and gate with the same metal. The propagation delay in a ring oscillator with a single-metal source/drain and gate formed simultaneously was 37 ps/gate (L/sub g/=0.9 mu m). The very short ohmic metal contacts and just three contact holes made it possible to reduce the memory cell area greatly. The cell is 21.5*21.5 mu m/sup 2/, one of the smallest ever reported for a GaAs-based static RAM. Using smaller load HEMTs or resistor loads in the memory cell, combined with nonalloyed ohmic technology with quarter- or subquarter-micrometer-gate HEMTs it is possible to fabricate a very-high-speed LSI such as a 64-kb static RAM with a reasonable chip size.<
>