Optical phase-locked loop (OPLL) for an amplitude modulated communications link using solid-state lasers

Theoretical analysis is formulated for a solid state laser based optical phase-locked loop (OPLL) disturbed by shot noise, amplitude modulated noise, and frequency noise. The frequency noise spectral density of solid state lasers is modeled to contain a white component, a 1/f component, and a strong 1/f/sup 2/ component at the laser output. This model is verified and the spectral content of each component is measured using an open-loop RF frequency discriminator. The choice of loop filter is made by considering the frequency noise components, transient effects, and the loop damping factor /spl zeta/. The total phase error variance as a function of loop bandwidth is displayed for several values of carrier signal-to-noise ratio for the measured frequency noise spectrum. Optimal loop bandwidth is also calculated as a function of carrier signal-to-noise ratio. An OPLL experiment is performed, and measured phase error variance is compared with the theoretical predictions using the measured frequency noise spectrum. The results show that the measured phase error variance closely matches the theoretical predictions.<
>