New hybrid integrated laser diode-drivers using microsolder bump bonding: SPICE simulation of high-speed modulation characteristics

This paper proposes two types of new hybrid integrated laser diode (LD)-drivers that use microsolder bump bonding instead of conventional wire bonding. In one, an LD and a driver are flip-chip bonded to each other; in the other, an LD and a driver are flip-chip bonded onto a substrate. Their performances are compared to those of a monolithic LD-driver and a conventional hybrid one using wire bonding by a simulation program with integrated circuit emphasis (SPICE) with particular emphasis on high-speed LD modulation. The nonreturn-to-zero (NRZ) eye patterns modulated at signal speeds up to 30 Gb/s by the new hybrid integrated LD-drivers were hardly inferior to those by the monolithic LD-driver, whereas those by conventional hybrid ones were greatly degraded over 10 Gb/s. The new hybrid integrated LD-drivers are a feasible alternative to monolithic ones for high-speed optical transmitters.<
>