Comparison of magnetic fields of thin-film heads and their corresponding bit patterns using magnetic force microscopy

We have used dc-mode magnetic force microscopy to image the magnetic fringing fields of several thin-film heads and the bit patterns written with these heads. The images were taken with Si/sub 3/N/sub 4/ tips coated with 10-nm Fe and 5-nm Au. The heads and disks are typical industry standards. The heads had a variety of pole piece configurations. A large track separation was used so that the erase bands could be thoroughly studied. We were surprised to discover magnetic fields that correspond to layers in the alumina overcoat near the pole pieces. The magnetic force microscope images of the bit pattern show a definite twist at the track edge that points toward the trailing pole piece. We also observed disk magnetization patterns that remained after an ac erase procedure.<
>