Losses due to rotational flux in three phase induction motors

This paper discusses rotational losses and how they are produced in the core materials of induction motors. These losses are largely caused by flux that rotates in the plane of the machine laminations. This suggests that steel specification for applications to rotating machines should be given in terms of rotational loss data as a material characteristic, in much the same fashion as Epstein test results are provided for alternating losses. If a standardized test for rotational losses were to be used, steel producers could rationally investigate the effects of composition and processing variables. This is necessary in order to produce low loss steels for motor applications. Reduction of rotational losses in motor cores could significantly lower AC machine operating costs and contribute to the growing interest and design of high efficiency induction motors. The paper describes a test procedure for determining rotational losses in a sample. It then compares the results with standardized tests from an Epstein test procedure. It is seen that there are significant differences in loss results obtained for the rotational test versus the alternating current test. The authors have investigated a time harmonic finite element formulation utilizing Magnet 2D, a commercially available package. The paper includes a brief analysis of a typical problem using this tool.<
>