FAUST-a fault tolerant sparing technique for ATM switch architectures

A family of fault tolerant architectures for ATM switching called FAUST is presented in this paper. The key idea behind the architecture is the incorporation of spare units and associated commutation logic into strategic partitions of the switching system. The definition of a replaceable unit is flexible, and based on packaging considerations. The commutation logic can switch in a spare unit in place of a failed one at cell rate, and is distributed entirely in the existing switch control units. So the additional overhead is almost entirely in the spare modules provided. The technique is far superior to a duplex configuration in terms of both reliability improvement and cost, and can be applied to established architectures for ATM switches, including multistage sort and shared memory based architectures. Its scalability also makes it applicable to system sizes from a few tens of lines to a few thousand.<
>