Low forward drop JBS rectifiers fabricated using submicron technology

This paper demonstrates the impact of using submicron technology (0.5 /spl mu/m design rules) on JBS Rectifiers to achieve very low forward voltage drops while maintaining good high temperature reverse blocking characteristics. Two dimensional numerical simulations show that decreasing P/sup +/-junction width and depth improves the on-state voltage drop by improved utilization of the active area for the Schottky region and improved spreading of majority carrier current from the Schottky contact. Experimental results that demonstrate the capability to reduce the forward drop from 0.5 V to 0.25 V, while operating at up to 125/spl deg/C-175/spl deg/C with good reverse blocking capability, are presented. The tradeoff curves between forward drop and reverse leakage current show 45/spl times/ reduction in leakage current for the same forward drop as compared to previous reports on JBS rectifiers. Power dissipation analysis indicates higher operating temperatures, (100/spl deg/C for Ti-JBS and 175/spl deg/C for Cr-JBS rectifiers) with reduced heat sink sizes for the JBS Rectifiers when compared to the conventional Schottky Barrier Diode (SBD).<
>