Bit-serial VLSI implementation of delayed LMS adaptive FIR filters

The delayed least-mean-square (DLMS) algorithm is useful for adaptive finite impulse response (FIR) filtering applications where high throughput rates are required. In the paper, a bit-serial bit-level systolic array based on new schemes for multiplication and inner-product computation is presented to implement DLMS adaptive N-tap FIR filters. The architecture is highly regular, modular, and thus well-suited to VLSI implementation. It has an efficiency of 100% and a throughput rate of one filter output per 2B cycles, where B is the word length of input data. In addition, the proposed array uses a small delay of [(4B+N/2+4)/2B] in the filter coefficient adaptation, where [x] is the smallest integer greater than or equal to x. This ensures that the DLMS algorithm can have good performance under proper selection of the step size. Based on a conservative design technique of static complementary metal oxide semiconductor (CMOS) logic, it is shown that the proposed system can be realized in a single chip for most practical applications.<>