Analysis and design of LCL-type series resonant converter

A series resonant converter modified by adding an inductor in parallel with the transformer primary (or secondary) is presented. This configuration is referred to as an "LCL-type series resonant converter". A simplified steady-state analysis using complex AC circuit analysis is presented. Based on the analysis, a simple design procedure is given. Detailed experimental results obtained from a MOSFET-based 640 W converter are presented to verify the analysis. A narrow variation in switching frequency is required to regulate the output voltage for a very wide change in load, and the converter has load short-circuit capability. It is shown that by placing the parallel inductor on the secondary side, the parasitics of the high-frequency transformer can be used profitably.<
>