Experimental analysis of a DC bucking motor blocking geomagnetically induced currents

An experimental study investigates the performance of a DC bucking motor for the blocking of geomagnetically induced currents (GICs) within a 3 kVA/416 V three-phase distribution feeder. This blocking method consists of connecting a separately excited DC motor between neutral and ground of a Y-grounded transformer consisting of a bank of three single-phase transformers. Losses and currents of the transformer and the blocking device are measured at no-load, rated-load, unbalanced-load and line-to-neutral short circuit conditions without and with GICs. Thereafter, the DC, AC and total /spl lambda/-i characteristics of one single-phase transformer of the above-mentioned transformer bank are simultaneously measured using an arbitrary waveform generator, a power amplifier and a digital data acquisition network. These /spl lambda/-i characteristics (where the DC bias current is a parameter) are then used to model a single-phase transformer under DC bias current conditions (e.g., assumed GICs) and to calculate voltages and currents of a single-phase transformer when subjected to GICs. The simulated signals are then compared with measured time functions.<
>