Optimal sensor selection strategy for discrete-time state estimators

A novel sensor selection strategy is introduced, which can be implemented on-line in time-varying discrete-time system. We consider a case in which several measurement subsystem are available, each of which may be used to drive a state estimation algorithm. However, due to practical implementation constraints (such as the ability of the on-board computer to process the acquired data), only one of these subsystems can actually by utilized at a measurement update. An algorithm is needed, by which the optimal measurement subsystem to be used is selected at each sensor selection epoch. The approach described is based on using the square root V-Lambda information filter as the underlying state estimation algorithm. This algorithm continuously provides its user with the spectral factors of the estimation error covariance matrix, which are used in this work as the basis for an on-line decision procedure by which the optimal measurement strategy is derived. At each sensor selection epoch, a measurement subsystem is selected, which contributes the largest amount of information along the principal state space direction associated with the largest current estimation error. A numerical example is presented, which demonstrates the performance of the new algorithm. The state estimation problem is solved for a third-order time-varying system equipped with three measurement subsystem, only one of which can be used at a measurement update. It is shown that the optimal measurement strategy algorithm enhances the estimator by substantially reducing the maximal estimation error.<
>