Optimal design of robot accuracy compensators

The problem of optimal design of robot accuracy compensators is addressed. Robot accuracy compensation requires that actual kinematic parameters of a robot be previously identified. Additive corrections of joint commands, including those at singular configurations, can be computed without solving the inverse kinematics problem for the actual robot. This is done by either the damped least-squares (DLS) algorithm or the linear quadratic regulator (LQR) algorithm, which is a recursive version of the DLS algorithm. The weight matrix in the performance index can be selected to achieve specific objectives, such as emphasizing end-effector's positioning accuracy over orientation accuracy or vice versa, or taking into account proximity to robot joint travel limits and singularity zones. The paper also compares the LQR and the DLS algorithms in terms of computational complexity, storage requirement, and programming convenience. Simulation results are provided to show the effectiveness of the algorithms.<
>