Prototype design, construction and test of a Pb/scintillator sampling calorimeter with wavelength shifter fiber optic readout

A prototype for the new DELPHI luminosity monitor has been built and tested. The scope of this prototype is to measure the response of the proposed calorimeter in the region which is most critical for the luminosity measurement, i.e., at the inner edge of the acceptance. The aim of the new luminosity monitor is to measure the LEP (Large Electron Position Collider) luminosity with per mill systematic uncertainty. This requires experimental biases at the level of 50 mu m or less in the definition of the fiducial volume. The technique used ensures good energy resolution and high spatial uniformity. With the prototype, better than 2% uniformity in response and an energy resolution of 3% at 45 GeV have been achieved.<
>