Design of residue generators and multioperand modular adders using carry-save adders

Residue generator is an essential building block of encoding/decoding circuitry for arithmetic error detecting codes and binary-to-residue number system (RNS) converter. In either case, a residue generator is an overhead for a system and as such it should be built with minimum amount of hardware and should not compromise the speed of a system. Multioperand modular adder (MOMA) is a computational element used to implement various operations in digital signal processing systems using RNS. A comprehensive study of new residue generators and MOMA's is presented. The design methods given here take advantage of the periodicity of the series of powers of 2 taken module A (A is a module). Four design schemes of the n-input residue generators mod A, which are best suited for various pairs of n and A, are proposed. Their pipelined versions can be clocked with the cycle determined by the delay of a full-adder and a latch. A family of design methods for parallel and word-serial, using similar concepts, is also given. Both classes of circuits employ new highly-parallel schemes using carry-save adders with end-around carry and a minimal amount of ROM and are well-suited for VLSI implementation. They are faster and use less hardware than similar circuits known to date. One of the MOMA's can be used to build a high-speed residue-to-binary converter based on the Chinese remainder theorem.<
>