Analysis and development of a signal injection technique using transmission lines embedded at phased array aperture

In a performance monitoring/fault isolation and correction (PM/FIC) system of a phased array antenna, a built-in transmission line embedded in the array aperture is used for signal injection to check the signal flow. The authors present an analysis of electromagnetic coupling between a twin-lead transmission line and a dipole element. An analysis of the coupling between a transmission line and a linear array of dipole elements over a ground plane has also been developed. The calculated data compared with the measured data favorably. A development of microstrip-line signal injectors embedded in an aperture of a 2D array of monopole excited parallel-plate waveguides has also been made. Measurements of the feed and aperture distributions have been made and the measured distributions follow the designed feed distribution closely.<
>