Rapid thermal curing of BCB dielectric

The feasibility of rapid thermal curing (RTC) of benzocyclobutene (BCB) thin films using an infrared belt furnace is demonstrated. The effects on film properties resulting from a dramatic reduction in cure time (5 h to 5 min) are summarized. The extent of cure was determined by Fourier-transform infrared (FTIR) methods and was subsequently modeled as a function of reaction kinetics using the measured temperature profiles. FTIR spectra from the RTC films were identical to those obtained using a conventional inert gas oven and a convectively heated belt furnace, indicating that the polymerization mechanisms and the resulting polymer network structure are identical and that no chemical enhancement of the curing occurs due to the absorption of infrared radiation. There are no statistically significant differences in the resulting stress and adhesion properties for samples cured by the RTC process versus the conventional process for film thicknesses ranging from 1 to 24 mu m. Planarization measurements, made on isolated features up to 100 mu m in width, also indicate no differences in the cured films.<
>