X-ray imaging camera tube using sputter-deposited CdTe/CdS heterojunction

CdTe heterojunction devices have been fabricated for the first time by an RF sputter deposition method for application to X-ray imaging sensors. The electrical resistivities of sputter-deposited polycrystalline CdS and CdTe films are greater than 10/sup 6/ Omega -cm and 10/sup 9/ Omega -cm, respectively. The fabricated CdS/CdTe heterojunction sensor shows a good diode characteristic and a high sensitivity to X-ray radiation. An X-ray imaging camera tube consisting of CdS/CdTe heterojunction photoconductive target shows three times larger responsivity to X-rays than the conventional PbO X-ray tube. The dark current density of the device is observed to be lower than 10 nA/cm/sup 2/ at 20 V target voltage at room temperature.<
>