Integrated low-ripple-voltage fast-response switched-capacitor power converter with interleaving regulation scheme

This paper presents a new integrated switched-capacitor (SC) power converter with an interleaving regulation scheme. By dividing the original power stage into sub-units and operating each sub-unit in an interleaving way, both output ripple voltage and load transient response are largely improved without compromising other design parameters. The closed-loop operation with interleaving analog PWM control enables the converter to be accurately regulated at any desired levels. The design was submitted for fabrication in 0.35 /spl mu/m CMOS N-well process. The entire die area including pads and power transistors is 3.52 mm/sup 2/. HSPICE post-layout simulation shows that, with a power supply of 1.5 V and a load of 250 mA, the converter is regulated at 2.5 V with an output ripple of 7 mV and the maximum efficiency of 83.2%. The converter responds to an 85-mA load change within 3 /spl mu/s with 22-mV voltage variation.