On the Behavior of Networks with ``Normalized'' Meshes

The theory of normalizing meshes in electrical networks, as outlined in a recent article appearing in this journal, is verified and illustrated by examples and figures relating to two- and three-mesh circuits. In the two-mesh circuit mesh No. 1 was normalized, thus confining the corresponding frequency to that mesh both for the transient and steady states as illustrated by Figs. 2 to 6 inclusive. For the three-mesh circuit meshes Nos. 1 and 3 were normalized, and the results are illustrated by Figs. 6 to 16 inclusive. In each case the theory was checked in every detail.