Piezoelectrically actuated tunable capacitor

This paper describes the design, fabrication, and characterization of the first MEMS piezoelectric tunable capacitors employing zinc oxide (ZnO) actuation. Relatively simple design rules for the device-structure optimization for largest deflection are shown from simulation results based on theoretical equations. The ZnO-actuated tunable capacitors are accordingly designed and fabricated with both surface and bulk micromachining techniques. Through the surface micromachining process, sacrificial silicon is removed with XeF
₂
, and parylene is successfully used as a supporting layer for a piezoelectric unimorph cantilever. For comparison, other two different structures using plasma-enhanced chemical-vapor deposition (PECVD) SiN and SU-8 as supporting layers are also fabricated. Deflection analyses are performed for three specific structures, among which the parylene-supported one is demonstrated to have the largest displacement and most suitable for tunable capacitor application. For bulk-micromachined tunable capacitor, we have implemented a novel design of a large structure driven by a ZnO unimorph, and obtained a tuning ratio of more than 21:1 (0.46 pF-10.02 pF). This is the highest tuning ratio reported to date for parallel-plate tunable capacitors while requiring an applied voltage of only 35 V