Bearings-only and Doppler-bearing tracking using instrumental variables

In bearings-only tracking (BOT) or Doppler and bearing tracking (DBT), both common passive sonar problems, the measurement equations are nonlinear. To apply the Kalman filter, it is necessary either to linearize the equations or to embed the nonlinearities into the noise terms. The former sometimes leads to filter divergence, while the latter produces biased estimates. A formulation of BOT and DBT which has a constant state vector and simplifies the tracking problem to one of constant parameter estimation is given. The solution is by the instrumental variable method. The instrumental variables are obtained from predictions based on past measurements and are therefore independent of the present noisy measurements. The result is a recursive unbiased estimator. The theoretical developments are verified by simulation, which also shows that the formulation leads to near optimal estimators whose errors are close to the Cramer-Rao lower bound (CRLB).<
>