A 10-bit 400-MS/s 160-mW 0.13-/spl mu/m CMOS dual-channel pipeline ADC without channel mismatch calibration

This paper describes a 10-bit 400-MS/s dual-channel analog-to-digital converter (ADC) insensitive to offset, gain, and sampling-time mismatches between channels. An adaptive closed-loop sampling technique based on a multi-stage amplifier eliminates the channel offset effectively. Multi-stage amplifiers with high DC gain reduce the gain mismatch between channels and guarantee a large signal swing at low supply voltages. A single clock-edge sampling scheme for clock-skew reduction minimizes the sampling-time mismatch. The proposed prototype ADC in a 0.13-/spl mu/m CMOS process occupies an active area of 4.2mm/sup 2/, dissipates 160mW from 1.2 V and 400 MS/s, and shows a signal-to-noise-and-distortion ratio of 54.8 dB with a 29-MHz sinusoidal input at 400 MS/s without any channel-mismatch calibration technique. The measured maximum offset and gain mismatches are less than 0.1% and 0.2%, respectively.