A single-chip tri-band (2100, 1900, 850/800 MHz) WCDMA/HSDPA cellular transceiver

This paper describes the design and performance of the first tri-band (2100, 1900, 800/850 MHz) single-chip 3G cellular transceiver IC for worldwide use. The transceiver has been designed to meet all narrowband blocker, newly proposed Adjacent Channel II, and Category 10 HSDPA (High Speed Downlink Packet Access) requirements. The design is part of a reconfigurable reference platform for multi-band, multi-mode (GSM/EDGE + WCDMA) radios. The zero-IF receiver is comprised of a novel multi-band quadrature mixer, seventh-order baseband filtering, and a novel DC offset correction scheme, which exhibits no settling time or peak switching transients after gain steps. The receiver lineup is designed to optimize HSDPA throughput and minimize sensitivity to analog baseband filter bandwidth variations. The direct-launch transmitter is made up of a third-order baseband filter, an I/Q modulator with variable gain, an integrated transformer, an RF variable gain amplifier, and a power amplifier driver. At +9.5-dBm output power, the transmitter achieves an error vector magnitude (EVM) of 4%. Fractional-N synthesizers achieve fast lock times of 50 /spl mu/s (150 /spl mu/s) within 20 ppm (0.1 ppm). Automatically calibrated, integrated VCOs achieve a 1.6-GHz tuning range to facilitate coverage over all six 3GPP frequency bands. The IC draws 34 mA in receive (18-mA receiver plus 16-mA fractional-N PLL/VCO) and 50 to 62 mA in transmit (-76 dBm to +9.5 dBm), including PLL/VCO, using a 2.775-V supply voltage. The RF transceiver is integrated with the baseband signal processing and associated passives in a 165-pad package, resulting in the first tri-band 3G radio transceiver with a digital interface which requires no external components.