Is the second order lattice balun a good solution in MMICs - a comparison with a direct-coupled transformer balun

This paper reports for the first time on a second order lattice balun (SOLB) implemented in commercial GaAs MMIC technology. Over a 90 % bandwidth 1.5-3.5 GHz, the measured amplitude and phase errors are less than 1.3 dB and 4/spl deg/, respectively. Over the same frequency range the reflection loss is better than 20 dB, and the insertion loss less than 1.0 dB with a minimum of less than 0.6 dB at the center frequency 2.5 GHz. The effective area of the fabricated circuit is 620 /spl times/ 650 /spl mu/m. For the sake of comparison a conventional direct-coupled transformer balun is designed in the same technology. The transformer balun is smaller, 370 /spl times/ 420 /spl mu/m/sup 2/ and it exhibits good balancing performance. However, its insertion loss is worse than 3 dB when the circuit is matched.