Characterization of IMPATT diodes at millimeter-wave frequencies

In order to evaluate the quality of a microwave device and to design a suitable circuit for it, the device must be characterized in terms of an equivalent circuit. At low microwave frequencies L through X bands, devices can be characterized in a relatively simple manner in conjunction with a coaxial transmission line network analyzer. At higher frequencies, such as millimeter-wave frequencies, however, the characterization must be carried out in a waveguide. This paper presents a technique for characterizing an IMPATT diode mounted in a waveguide and the associated circuit parasitics at millimeter-wave frequencies. The passive and active device parameters and the circuit parasitics, which have increased effects particularly at millimeter-wave frequencies, are evaluated by means of a computer-aided iterative curve-fitting method from the measured variation of the input impedance (VSWR) as a function of position of a movable short placed behind the device. The accuracy of the technique and the computer program are first checked by comparing the characteristics of an
X
-band IMPATT diode measured by the present technique and those measured by the network analyzer method. The characterization of a millimeter-wave IMPATT diode is then presented. A technique to achieve the stabilization required for the measurement of active parameters of the diode is also described. Comparison of the performance of an IMPATT diode amplifier calculated from the measured diode characteristics with the experimentally observed amplifier performance is then presented. It is shown that the device characterization technique can effectively be used for the analysis and design of a millimeter-wave circuit in which the device is used.