Spreading code protocols for distributed spread-spectrum packet radio networks

Spreading code protocols for a distributed spread-spectrum packet radio network are presented. A distributed single-hop system (i.e. each terminal can hear all other terminals) with the users approximately synchronized and a set of prespecified spreading codes are presented. The spreading code protocol is a policy for choosing a spreading code to be used, given that a terminal has a packet to send, and a policy for monitoring spreading codes, given that a terminal is idle. A slotted system where a packet occupies a number of slots is considered, and two protocols that involve changing the spreading code of a transmission after an initial header is transmitted are presented. In one protocol, the header is transmitted on a common code, and in the other it is transmitted on a receiver-based code, the rest of the packet being transmitted on a transmitter-based code. In the receiving mode, a terminal monitors either a common code, in the first case, or a receiver-based code in the latter. Upon recognizing its own address and the source address, the receiver dynamically switches to a despreading code corresponding to the source. Throughput results are obtained for the case of geometrically distributed packet lengths.<
>