The experimental and theoretical approaches of contraction stress build-up of anisotropic conductive adhesives for flip chip interconnection

The important mechanical mechanism for the electrical conduction of anisotropic conductive films (ACFs) is the joint clamping force after curing and cooling-down processes of ACFs. In this study, the mechanism of shrinkage and contraction stress and the relationship between these mechanisms and the thermo-mechanical properties of ACFs are investigated in detail. Both thickness shrinkages and modulus changes of four kinds of ACFs with different thermo-mechanical properties are experimentally investigated with thermo-mechanical and dynamic mechanical analysis. Based on the incremental approach to linear elasticity, contraction stresses of ACFs developed along the thickness direction are estimated. Contraction stresses in ACFs were found to be significantly developed by the cooling process from the glass transition temperature to room temperature. Moreover, electrical characteristics of ACF contact during the cooling process indicates that the electrical conduction of ACF joint is robustly maintained by large contraction stress below T/sub g/. The increasing rate of contraction stresses below T/sub g/ was strongly dependent on both thermal expansion coefficient (CTE) and elastic modulus (E) of ACFs. A linear relationship between the experimental increasing rate and E/spl times/CTE reveals that the build-up behavior of contraction stress is closely correlated with the ACF material properties: thermal expansion coefficient, glassy modulus, and T/sub g/.