A programmable digital filter IC employing multiple processors on a single chip

A programmable general-purpose digital filter IC that employs multiple processing units on a single chip is described. The processors operate in parallel and communicate through on-chip dual-access storage register blocks. The processors are arranged as a ring with the locally shared register blocks between each adjacent pair of processors. It is shown that this ring of processors is capable of realizing a rich variety of filter structures operating at the maximum possible instruction execution rate. Fast real-time processing at video rates is obtained by using a fast hardware multiplier in each processor and by employing a design that permits each processor to simultaneously execute multiplication and addition operations in a single instruction cycle. An advantage of the design is the free passing of data between adjacent processors due to each register block's dual port. A ring of five such processors can be implemented in 2- mu m CMOS technology on a single 7.9 mm*9.2 mm chip operating at data rates up to 40 MHz.<
>