Optimal feed-forward compensation for PWM DC/DC converters with 'linear' and 'quadratic' conversion ratio

An analytical procedure to optimize the feedforward compensation for any PWM DC/DC power converters is described. Achieving zero DC audiosusceptibility was found to be possible for the buck, buck-boost, Cuk, and SEPIC cells; for the boost converter, however, only nonoptimal compensation is feasible. Rules for the design of PWM controllers and procedures for the evaluation of the hardware-introduced errors are discussed. A PWM controller implementing the optimal feedforward compensation for buck-boost, Cuk, and SEPIC cells is described and fully experimentally characterized.<
>