A digital power factor correction (PFC) control strategy optimized for DSP

A predictive algorithm for digital control power factor correction (PFC) is presented in this paper. Based on this algorithm, all of the duty cycles required to achieve unity power factor in one half line period are calculated in advance by digital signal processors (DSP). A boost converter controlled by these precalculated duty cycles can achieve sinusoidal current waveform. One main advantage is that the digital control PFC implementation based on this control strategy can operate at a high switching frequency which is not directly dependent on the processing speed of DSP. Input voltage feed-forward compensation makes the output voltage insensitive to the input voltage variation and guarantees sinusoidal input current even if the input voltage is distorted. A prototype of boost PFC controlled by a DSP evaluation board was set up to implement the proposed predictive control strategy. Both the simulation and experimental results show that the proposed predictive strategy for PFC achieves near unity power factor.