Force-reflection and shared compliant control in operating telemanipulators with time delay

Shared compliant control has been incorporated into an advanced six-degree-of-freedom force-reflecting telemanipulation system. With this system the authors have investigated the effect of time delay on human telemanipulation task performance. Time delays of between 2 and 4096 ms were introduced between master and slave arms, and high-precision peg-in-hole tasks were performed by six test operators with two modes of control: kinesthetic force feedback (KFF) and shared compliant control (SCC). Task performance was quantified in terms of the completion time (CT) and the sum of square forces (SOSF). The experimental results demonstrate the superiority of SCC over KFF for time-delayed telemanipulation. SCC has significantly lower rates of increase than KFF in both CT and SOSF with time delay. Only SCC enabled task performance at delays above 1 s. Constant force maintenance tasks were also performed to investigate the effect of time delay on the stability of force reflection. SCC also has beneficial effects on telemanipulation without time delay.<
>