Investigation of breakdown and DC behavior in HBTs with (Al,Ga)As collector layer

We report on the realization of an InGaP-GaAs-based double heterojunction bipolar transistor with high breakdown voltages of up to 85 V using an Al/sub 0.2/Ga/sub 0.8/As collector. These results were achieved with devices with a 2.8 μm collector doped to 6×10/sup 15/ cm/sup -3/ (with an emitter area of 60×60 μm
²
). They agree well with calculated data from a semi-analytical breakdown model. A /spl beta//R/sub SBI/ (intrinsic base sheet resistance) ratio of more than 0.5 by introducing a 150-nm-thick graded Al-content region at the base-collector heterojunction was achieved. This layer is needed to efficiently suppress current blocking, which is otherwise caused by the conduction band offset from GaAs to Al/sub 0.2/Ga/sub 0.8/As. The thickness of this region was determined by two-dimensional numerical device simulations that are in good agreement with the measured device properties.