Experimental results of the Nb/sub 3/Sn demo poloidal coil (DPC-EX)

In order to demonstrate the applicability of a Nb/sub 3/Sn conductor to pulsed poloidal coils for Tokamak fusion machines, the Nb/sub 3/Sn Demo Poloidal Coil (DPC-EX) has been fabricated and tested. DPC-EX, whose inner diameter is 1 m, consists of two double pancakes made by a react-and-wind technique. The coil has a flat cable-in-conduit conductor cooled by forced-flow helium. DPC-EX has been set up in the Demo Poloidal Coil Test Facility (DPCF). In the operation of the coils in series, DPC-EX has been ramped up to 17 kA in 1 s. The magnetic field at this point was 6.7 T, and pulsed operation at 6.7 T/s was thus demonstrated. An average current density of 37.2 A/mm/sup 2/ in the winding was achieved in this operation, and the AC loss of the coil was confirmed to be quite small.