60-GHz-band coplanar MMIC active filters

This paper presents the design and performance of 60-GHz-band coplanar monolithic microwave integrated circuit (MMIC) active filters. To compensate for the loss of the passive filter, a resonator composed of a quarter-wavelength line is terminated by a circuit with a constant negative resistance over a wide frequency band. Cross-coupling is introduced to make the attenuation poles on both sides of the passband. We develop two types of two-stage filter: one with medium bandwidth and the other with narrow bandwidth. The former shows an insertion loss of 3.0 dB with a 3-dB bandwidth of 2.6 GHz and a rejection of larger than 20 dB at a 3-GHz separation from a center frequency of 65.0 GHz. This filter also shows a noise figure of 10.5 dB. The latter filter shows an insertion loss of 2.8 dB with a 10-dB bandwidth of 2.1 GHz at a center frequency of 65.0 GHz. It also shows an output power of 5.0 dBm at a 1-dB compression point. The loss variation due to temperature variation is successfully compensated using a gate bias control circuit. The size of the MMIC filters is 2.5 mm/spl times/1.1 mm.