Experimental analysis of the effect of metal thickness on the quality factor in integrated spiral inductors for RF ICs

The effect of metal thickness on the quality (Q-) factor of the integrated spiral inductor is investigated in this paper. The inductors with metal thicknesses of 5/spl sim/22.5 μm were fabricated on the standard silicon substrate of 1/spl sim/30 /spl Omega//spl middot/cm in resistivity by using thick-metal surface micromachining technology. The fabricated inductors were measured at GHz ranges to extract their major parameters (Q-factor, inductance, and resistance). From the experimental analysis assisted by FEM simulation, we first reported that the metal thickness' effect on the Q-factor strongly depends on the innermost turn diameter of the spiral inductor, so that it is possible to improve Q-factors further by increasing the metal thickness beyond 10 μm.