Circuit implementation of linguistic-hedge fuzzy logic controller in current-mode approach

In this paper, a novel fuzzy logic controller called linguistic-hedge fuzzy logic controller in a mixed-signal circuit design is discussed. The linguistic-hedge fuzzy logic controller has the following advantages: 1) it needs only three simple-shape membership functions for characterizing each variable prior to the linguistic-hedge modifications; 2) it is sufficient to adopt nine rules for inference; 3) the rules are developed intuitively without heavy dependence on the endeavors of experts; 4) it performs better than conventional fuzzy logic controllers; and 5) it can be realized with a lower design complexity and a smaller hardware overhead as compared with the controllers that required more than nine rules. In this implementation, a current-mode approach is adopted in designing the signal processing portions to simplify the circuit complexity; digital circuits are adopted to implement the programmable units. This design was fabricated with a TSMC 0.35 /spl mu/m single-polysilicon-quadruple-metal CMOS process. In this chip, the LHFLC processes two input variables and one output variable. Each variable is specified using three membership functions. Nine inference rules, scheduled in a rule table with a dimension of 3 /spl times/ 3, define the relationship implications between these three variables. Under a supply voltage of 3.3 V, the measurement results show that the measured control surface and the control goal are consistent. The speed of inference operation goes up to 0.5M FLIPS that is fast enough for the control application of the cart-pole balance system. The cart-pole balance system experimental results show that this chip works with nine inference rules. Furthermore, by performing some off-chip modifications, such as shifting and scaling on the input signals and output signal of this design, according to the specifications defined by the controlled plants, this design is suitable for many control applications.