Field Theory Design of Rectangular Waveguide Broad-Wall Metal-Insert Slot Couplers for Millimeter-Wave Applications (Correction)

In the above paper, the designation of the columns "Slot Lengths (mm)" of Tables I-IV should have read "Half Slot Lengths (mm)," as is indicated correctly in Fig. 1 of the paper, by z = l/sub 1/, z = 2l/sub 1/, respectively, for the first slot. S/sub 1/, S/sub 2/,· · ·, in the figure of Table I, therefore, should have read 2S/sub 1/, 2S/sub 2/,· · ·, as shown above.