Design of a Switched Broad-Band Communications Network for Interactive Services

The congestion in broad-band communications networks resulting from the increased demand for interactive services is considered. It is shown that services such as a video library could not be provided to the majority of subscribers in a conventional CATV network. A design is developed for a space division multiplex broad-band network which can be expanded at minimum cost to meet an increasing demand for interactive services. The network contains two signal distribution networks: a cablecast system similar to the Rediffusion system, and a switched communication network providing point-to-point circuits for both one-way and two-way services. All broad-band signals are transmitted to the subscribers in the 1- to 10-MHz spectrum, permitting the use of twisted pair video cables and a minimum number of cable amplifiers. The broad-band cable network (BCN) is organized around 15 local switching exchanges and one central exchange. Multipoint switches in local exchanges under wired-logic circuit control connect individual subscriber communication lines to any channel. Crosspoint matrix switching groups in the local and central exchanges connect communication circuits in the broad-band communication network under programmed computer control. This network is accessed via links terminating on one channel of the multiposition switches. Per-subscriber costs are estimated to be 190 dollars for a cablecast system serving 3800 subscribers. Additional expenditures per subscriber of 40 dollars for fixed costs and 40 dollars for variable costs would provide interactive services. The range of interactive services provided would be extremely flexible, including both one-way video library service and point-to-point two-way communications.