A 2-/spl mu/m CMOS 8-MIPS digital processor with parallel processing capability

A 2-/spl mu/m CMOS VLSI digital signal processor (DSP) family, the SP50, is described that is capable of eight million instructions per second and up to six concurrent operations in each instruction. Two DSPs, the PCB5010 and PCB5011, have been developed. Both are based on a common architecture which contains two 16-bit data buses, and a 16/spl times/16/spl rarr/40-bit multiplier accumulator and 16-bit ALU, both with multiprecision support in hardware. Also implemented are two static data RAMs (128/spl times/16 or 256/spl times/16), a data ROM (51/spl times/16), a 15-word three-port register file, three address computation units, and five serial and parallel I/O interfaces. The data path is controlled by an orthogonal instruction set, using 40-bit microcode words. The controller contains a five-level stack and an instruction repeat register, and can have either on-chip program memory (RAM: 32/spl times/40; ROM: 987/spl times/40) or off-chip program memory (up to 64K/spl times/40). Benchmarks show a two to sixfold improvement in overall performance over its predecessors.