A Sensorless Speed Control of High-Speed BLDC Motor Using Variable Slope SMO

Low-power and high-speed BLDC(Brushless DC) motor is widely used in vacuum cleaners. This paper presents a sensorless speed control scheme for a high-speed BLDC motor of a hand-stick vacuum cleaner using a variable slope sliding mode observer(SMO). The SMO using the signum function is very effective for the sensorless estimation of the BLDC motor. However, the chattering effect on the slide surface from the signum function decreases the sensorless performance in the wide speed range. The sigmoid function instead of the signum function can reduce the chattering effect. However, the convergence is inversely proportional to the reduced chattering effect. In order to reduce the chattering effect and keep the proper convergence performance, the proposed method uses a variable acceleration slope of the sigmoid function. In the low-speed range, the acceleration slope of SMO is decreased to reduce the chattering. And, it is increased to improve the convergence in the high-speed region. The acceleration slope of the sigmoid function is designed as a function of the estimated speed to keep the constant convergence with reduced chattering in the sensorless speed and position estimation. In order to verify the proposed sensorless control scheme, 115 krpm speed 540W BLDC motor for a vacuum cleaner is tested with various SMO methods. In the experimental results, the proposed method shows better sensorless speed control performance in the wide speed range.