Photonic-crystal distributed-feedback quantum cascade lasers

Because of an intrinsically low linewidth-enhancement factor, the quantum cascade laser (QCL) is especially favorable for patterning with a recently proposed 2-D photonic crystal (PC) lattice that substantially increases the device area over which optical coherence can be maintained. In this work, we use an original time-domain Fourier-transform (TDFT) algorithm to theoretically investigate the beam quality and spectral purity of gain-guided PC distributed-feedback (DFB) quantum cascade lasers. The conventional 1-D DFB laser and also the angled-grating DFB (/spl alpha/-DFB) laser are special cases of the PCDFB geometry. By searching the parameter space consisting of tilt angle, coupling coefficients, stripe width, and cavity length, we have theoretically optimized the PCDFB gratings for QCL gain regions. At a wavelength of 4.6 /spl mu/m, the simulations project single-mode emission from stripes as wide as 1.2 mm, and etendues of no more than three times the diffraction limit for 2-mm stripes. We also examine the tolerances required for single-mode and high-brightness operation. Comparisons are made to analogous simulations of a-DFB QCL lasers.