Novel Zero-Voltage Zero-Current Transition Buck Converter With Minimal Impact of Active Auxiliary Cell on Overall Dynamics

This paper presents a novel zero-voltage zero-current transition DC/DC buck converter, which uses an active auxiliary resonant network to achieve soft switching operation of semiconductor switches and soft-recovery of power diodes over wide output power range and offers high efficiency. The auxiliary cell in the proposed converter does not cause any additional current stress on the semiconductor switches and has minimal impact on overall dynamics of the converter. Steady-state performance of the converter has been presented with detailed theoretical analysis of all operating modes. The design of auxiliary cell components and development of small signal model of the converter have been carried out from the mathematical equations depicting its dynamic behaviour. A closed loop voltage mode controller with a type III compensator has been developed for the converter to achieve the desired transient response under the influence of external disturbances. Power loss analysis and superiority of the proposed converter over other conventional configurations are also presented here. Finally, soft-switching behaviour and step-input transient response of the converter are verified by hardware experimentation on a 150W, 100 kHz prototype model. The experimental measurements have successfully validated the theoretically predicted behaviour of the converter.