High power beam profile monitor with optical transition radiation

A simple monitor has been built to measure the profile of the high power beam (800 kW) delivered by the CEBAF accelerator at Jefferson Lab. The monitor uses the optical part of the forward transition radiation emitted from a thin carbon foil. The small beam size to be measured, about 100 /spl mu/m, is challenging not only for the power density involved but also for the resolution the instrument must achieve. An important part of the beam instrumentation community believes the radiation being emitted into a cone of characteristic angle 1//spl gamma/ is originated from a region of transverse dimension roughly /spl lambda///spl gamma/; thus the apparent size of the source of transition radiation would become very large for highly relativistic particles. Our monitor measures 100 /spl mu/m beam sizes that are much smaller than the 3.2 mm /spl lambda//spl gamma/ limit; it confirms the statement of Rule and Fiorito (1991) that optical transition radiation can be used to image small beams at high energy. The present paper describes the instrument and its performance. We tested the foil in, up to 180 /spl mu/A of CW beam without causing noticeable beam loss, even at 800 MeV, the lowest CEBAF energy.