Performance improvement of CMOS-MEMS Pirani vacuum gauge with hollow heater design

A novel heater-with-holes design is developed to realize a CMOS-MEMS Pirani vacuum gauge. The Pirani vacuum gauge is a thermal-based pressure sensor consisting of heater and heat-sink units. The heat is conducted from heater to heat-sink through gas whose thermal conductivity changed with pressure. The proposed design has the following merits: (1) The holes on heater increase the thermal resistance and then improve the efficiency of heat transfer; (2) The heat-sink mesas are added to compensate the lost active area between heater and heat sink; (3) Easily integrate with other packaged CMOS-MEMS devices for pressure monitoring [1]. This study demonstrates two heaters with different hole-designs for concept proven. The devices have total die size of 206µm×82µm and 0.53µm sensing gap. Preliminary results show that the gauges have sensing range of 0.8–200torr and 0.2–200torr with sensitivity of 6.99×10
³
(K/W)/torr and 8.15×10
³
(K/W)/torr. The power dissipations are respectively 179.43µW and 127.59µW. In comparison, the conventional gauge containing heater w/o holes has sensing range 1–200torr with sensitivity of 0.91×10
³
(K/W)/torr and power dissipation of 1117.34µW.